美国ATV越野车产品市场准入管理的机构包括美国国家公路交通管理局(NHTSA)、美国环境保护署(EPA)、美国消费品安全委员会(CPSC)、美国特种车辆协会(SVIA)。美国国家公路交通管理局是ATV越野车进口美国的相关授权部门；美国环境保护署颁布ATV越野车污染及噪音排放方面的技术法规；美国消费品安全委员会(CPSC)对市场上流通的ATV越野车采取相应的监督和召回工作，且联合美国特种车辆协会(SVIA)制定和发布ATV的相关安全技术法规。
▎认证车型分类
ATV：机动非道路车辆，跨坐式座椅和转向把手。
l 型 ATV 供单个操作员使用，没有乘客；
ll 型 ATV 供操作员或操作员和乘客（最多一名）使用。
▎机动车部分安全核心部件
▎车辆额外技术要求矩阵
▎ATV排放（尾气和噪音）认证
尾气排放：
现行标准：40 CFR parts 1051, 1060 and 1068
需要符合以下条件：
1. § 1051.107的废气排放标准
2. § 1051.110的蒸发排放标准
3. § 1051.115中的所有要求
噪音标准：US 40 CFR 205, Subpart D
▎认证流程
注册并提交申请
准备技术文件
送样测试
编写测试报告
递交符合性声明
准备清关资料
接受监管及召回
▎ATIC 零部件认证产品线
ATIC泰测零部件认证产品线专注于欧美国家汽车零部件和消费品准入研究与认证，提供一站式国家准入和认证服务。ATIC泰测零部件认证部有多名资深项目工程师和项目经理，在欧美国家相关认证，特别是欧盟EU/UN，两轮车WVTA，巴西INMETRO、ANATEL等认证领域有及其丰富的项目经验。
BRIEF ANALYSIS OF U.S. ALL TERRAIN VEHICLE CERTIFICATION
Briefly: The U.S. ATV off-road product market access management agencies include the National Highway Traffic Administration (NHTSA), the U.S. Environmental Protection Agency (EPA), the U.S. Consumer Product Safety Commission (CPSC), and the U.S. Special Vehicle Association (SVIA). The NHTSA is the authorized authority for ATVs imported into the United States; the EPA issues technical regulations on ATV pollution and noise emissions; the CPSC monitors and recalls ATVs on the market; and the SVIA develops and publishes ATV-related technical regulations. Safety and technical regulations.
▎CLASSIFICATION OF CERTIFIED MODELS
ATV: Motorized off-road vehicle with straddle seat and steering handle.
Type l ATV for single operator, no passenger.
Type ll ATV for operator or operator and passenger (up to one).
▎SOME OF THE CORE SAFETY COMPONENTS OF MOTOR VEHICLES ARE AS FOLLOWS
▎MATRIX OF ADDITIONAL TECHNICAL REQUIREMENTS FOR VEHICLES
▎ATV EMISSIONS (EXHAUST AND NOISE) CERTIFICATION
Exhaust Emissions:
Current Standards: 40 CFR parts 1051, 1060 and 1068;
The following conditions need to be met:
1. Exhaust emission standards in § 1051.107
2. Evaporative emission standards in § 1051.110
3. All requirements in § 1051.115
Noise Standards: US 40 CFR 205, Subpart D
▎MODELSCERTIFICATION PROCESS
1.Register and submit application
2.Prepare technical documents
3.Send samples for testing
4.Prepare test report
5.Submit Declaration of Conformity
6.Prepare customs clearance information
7.Accept regulation and recall
▎ATIC COMPONENT HOMOLOGATION DEPARTMENT
ATIC Component Homologation Product Line focuses on regulation research and homologation service for components and consumer products especially for European and American markets. We are committed to provide one-stop global homologation solution for automotive components and consumer products.
全部评论 （0）